GE Feb-74 - Manual (Page 31)

31
# button does not work • Make sure phone is set to TONE.
• Change channels
• Is handset out of range? Move closer to the base.
• Does the base need to be relocated?
• Charge battery.
• Make sure base is not plugged into an outlet
with another household appliance
Unit beeps • Place handset in base for 20 seconds to reset
the security code. If that doesn’t work, charge
battery for 12 hours.
• Clean charging contacts on handset and base
with a soft cloth, or an eraser.
• See solutions for “No dial tone.”
• Replace battery.
Memory Dialing • Did you program the memory location keys
correctly?
• Did you follow the proper dialing sequence?
• Make sure TONE/PULSE switch is correctly set.
• Did you reprogram numbers into memory after
power outage or replacing battery?
You experience static,
noise, or fading in and
out