GE Feb-74 - Manual (Page 29)

29
T
ROUBLESHOOTING
T
IPS
C
ALLER
ID
PROBLEM SOLUTION
No Display • Try replacing the battery.
• If you are using AC power, make sure that the
unit is connected to a non-switched electrical
outlet. Disconnect the unit from the plug and plug
it in again.
Caller ID Error • The unit displays this message if it detects
anything other than valid Caller ID information
during the silent period after the first ring. This
message indicates either the presence of noises
on the line, or that an invalid message has been
sent from the telephone company.
C
ALL
W
AITING
PROBLEM SOLUTION
• You must subscribe to Call Waiting for this
feature to work.
• Even if you have subscribed to both Call
Waiting and Caller ID, you must call your phone
company and tell them to integrate your Call
Waiting and Caller ID services.
You hear call
waiting tone but
number does not
appear in display.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○