Grizzly G0637 - Manual (Page 18)

-16-
G0637/G0638 Cyclone Dust Collector
We recommend that you mount your new dust
collection system to the floor. Because floor
materials may vary, floor mounting hardware is
not included.
Bolting to Concrete Floors
Lag shield anchors with lag bolts and anchor
studs (
Figure 10) are two popular methods for
anchoring an object to a concrete floor. We sug-
gest you research the many options for mounting
your machine and choose the one that best fits
your specific application.
Mounting to Shop
Floor
NOTICE
Anchor studs are stronger and more per-
manent alternatives to lag shield anchors;
however, they will stick out of the floor,
presenting a tripping hazard if you decide
to move your machine.
Figure 10. Typical fasteners for mounting to
concrete floors.
NOTICE
Since your dust collection system will be
hardwired to the power source, we strongly
recommend securing your machine to the
floor. Consult with your electrician to ensure
compliance with applicable codes.
Mounting to Shop Floor
Some surfaces may be coated with a waxy oil to
prevent corrosion during shipment. Remove this
protective coating with a solvent cleaner or citrus-
based degreaser such as Grizzly’s G7895 Citrus
Degreaser. To clean thoroughly, some parts must
be removed.
For optimum performance from
your machine, clean all moving parts or slid-
ing contact surfaces. Avoid chlorine-based sol-
vents, such as acetone or brake parts cleaner that
may damage painted surfaces. Always follow the
manufacturer’s instructions when using any type
of cleaning product.
Clean Up
Figure 11. Grizzly citrus degreaser.
G7895—Grizzly Citrus Degreaser
This natural, citrus-based degreaser is a great
solution for removing export grease, and it’s much
safer to work around than nasty solvents.
Gasoline and petroleum
products have low flash
points and can explode or
cause fire if used to clean
machinery. DO NOT use
these products to clean
the machinery.
Many cleaning solvents are
toxic if inhaled. Minimize
your risk by only using
these products in a well
ventilated area.
Clean Up