Global Technology Associates SOFTWARE FIREWALL GBWA200501-01 - Manual (Page 56)

GB-Ware Firewall Product Guide 52
4) GBAdmin will connect to the GB-Ware firewall and prompt you for
the user ID and password selected during installation; when suc-
cessfully authenticated, GBAdmin will load the GB-Ware configura-
tion.
5) Merge the old configuration with the GB-Ware firewall configuration.
Click File then Merge. A warning will ask if you wish to overwrite your
current settings. Click
YES
. In the M
ERGE
dialog box, select
FILE
in
the S
OURCE
field. In the I
NFORMATION TO
M
ERGE
field, select
CONFIGU-
RATION
. Do not check the
RUNTIME
check box.
File>Merge the GB360.GBcfg using GBAdmin
6) Click Browse and find the directory where you saved the old GNAT
Box firewall configuration. Select the configuration file and click
OK
.
7) Enter the login for your old configuration file. After entering it, press
RETURN
to load the GB-Ware firewall configuration.
8) Click Basic Configuration then Features. Enter the GB-Ware serial number
and activation code if necessary. (This step should be completed
during installation of GB-Ware.)
Entering the Serial Number and Activation Codes using GBAdmin
9) Click Basic Configuration then Network Information. Verify that all your in-
terfaces have been recognized and that they have the proper NICs
selected.
Configuring Logical Interfaces using GBAdmin