Global Technology Associates SOFTWARE FIREWALL GBWA200501-01 - Manual (Page 16)

GB-Ware Firewall Product Guide 12
Caution
Installing GB-Ware on a hard drive will erase its contents and replace
them with GB-Ware. If you wish to keep the data on a hard drive,
do not install GB-Ware on it; instead, install GB-Ware on a different
hard drive. You may also wish to temporarily disconnect other (non-
GB-Ware) hard drives to prevent accidental erasure during firewall
installation.
2. Power on the computer. Insert the GNAT Box System installation
CD into the system’s CD-ROM drive.
3. Restart the computer using a cold reboot. (In a cold reboot, shut
down, turn off, and then turn your computer back on.)
If the boot sequence is correctly set to boot from CD-ROM, the system will
boot from the GNAT Box System installation CD.
Using GB-Ware’s GNAT Box Installer
After setting the BIOS, inserting the installation CD and restarting the
computer, you will see the About GNAT Box System Software Runtime Installer
screen for the installation CD. Press the
SPACE BAR
or
ENTER
key to
continue and install GB-Ware.
About the GNAT Box System Software Runtime Installer
The GNAT Box System Software Licensing Agreement will appear. Use the
TAB
or arrow key to move to the selection. Press the
SPACE BAR
or
ENTER
to select your answer. Select
VIEW LICENSE
to read the terms of the soft-
ware and hardware license. If you agree with the terms, select
ACCEPT
to
continue the installation. The
DO NOT ACCEPT
selection cancels installation
and closes the program.