Global Technology Associates SOFTWARE FIREWALL GBWA200501-01 User Manual
Page 38
GB-Ware Firewall Product Guide
34
Note
If you cancel the Setup Wizard, go to Basic Configuration then Features
to enter your serial number and activation code. Next, enter your
initial configuration information in Basic Configuration then Network
Information. Your firewall will not be functional until these steps are
performed, either by hand or Setup Wizard.
Setup Wizard
3. Host Name
Enter the host name of the firewall. The host name should be a
fully-qualified domain name registered with your domain name
server. Select
NEXT
.
4. Contact Information
Fill in the contact information for your firewall. Select
NEXT
.
5. Serial Number and Activation
Enter your firewall’s serial number and activation code, which are
retrievable from the GTA Support web site (https://center/login/) under
VIEW PRODUCTS
after registering your product.
Select
NEXT
.
6a. PPP/PPPoE/PPTP
Select
NO
if you will not be using PPP on the external network inter-
face, and go to step 6b. To use PPP/PPPoE/PPTP, toggle the field
value to
YES
and click
NEXT
, then go to PPP Configuration.
Use PPP?
6b. DHCP
If your system will not utilize DHCP on the external network inter-
face, select
NO,
and go to step 6c. If your system will use DHCP
on the external network interface, select
YES,
and skip to step 7.
(Typically, cable modem and xDSL sites use DHCP.)