Grandstream Networks 200 - Manual (Page 13)

Grandstream Networks, Inc. BT200 User Manual Page 13 of 33
Firmware 1.1.6.44 Last Updated: 12/2008
Table 6: BT200 Keypad Buttons
Key Button Key Button Definitions
0 - 9, *, # Digit, star and pound keys are usually used to make phone calls
↓
1) Reduce handset, speakerphone/headset volume after off hook the phone
via handset or speaker
2) Reduce ring tone volume when phone in IDLE and off hook to confirm the
changed ring tone volume
3) Next menu item browsing when phone is in IDLE mode after MENU key
pressed, off hook to interrupt and exit
MENU
Enter keypad MENU mode when phone is in IDLE mode.
It is also the ENTER key once entering MENU
CALLED
After off hook, press to display the dialed numbers. When number displayed,
press the SEND key can make call using that displayed number
CALLERS
After off hook, press to display the incoming Caller IDs. When number
displayed, press the SEND key can make call using that displayed number
MESSAGE Enter to retrieve voice mails from Voice Mail Portal or Server
HOLD Temporarily hold the active call
TRANSFER Transfer the active call to another party
CONFERENCE
Establish 3-way conferencing call
FLASH Flash event to switch between two lines
MUTE/DEL
Mute an active call; or Delete a key entry
Also used to ‘REJECT’ incoming call.
SEND/(RE)DIAL
Dial a new number inputted or Redial the number last dialed. After entering
the phone number, pressing this key would force a call to go out immediately
before timeout
SPEAKERPHONE Enter hands-free mode
↑
1) Increase handset, speakerphone/headset volume after off hook the phone
via handset or speaker
2) Increase ring tone volume when phone in IDLE and off hook to confirm the
changed ring tone volume
3) Next menu item browsing when phone is in IDLE mode after MENU key
pressed, off hook to interrupt and exit