Grizzly H6331 - Manual (Page 8)

Model h6331 hVhp spray gun set -8 -
section 3: set up
figure 1. Model h6331 inventory.
your spray gun left our warehouse in a
carefully packed box. if you discover the
spray gun is damaged after you have
signed for delivery, please immediately
call Customer Service at (570) 546-9663
for advice.
save the containers and all packing materi-
als for possible inspection by the carrier or
its agent. Otherwise, filing a freight claim
can be difficult.
after you have unpacked the carton you
should find the following:
model h6331 inventory (figure 1) Qty
a. small spray gun . .............................. 1
b. storage Case ..................................... 1
c. large spray gun ............................... 1
d.
1 ⁄
4
" npt Quick disconnect Fittings ..... 2
e. 1 ⁄
4
" npt push-on hose Fitting ........... 1
inventory
d
a
e
C
B
assembly
1. attach the air hose to the spray gun
with the included male 1 ⁄
4
" npt quick
connect fitting.
note: You have the option of attach-
ing a regulator/gauge directly to the
gun for convenient air pressure control
at the gun.
2. attach the spray gun to an air supply
regulated between 43–58 psi.
note: For the best results, use a hose
that will be dedicated for spray use
only. Do not use a hose that has been
used with an in-line oiler as the oil can
contaminate the paint being sprayed
or clog an in-line filter.