GIGABYTE GN-BTD01 - Manual (Page 18)

GN-BTD01 Bluetooth User’s Guide
5.3.3 Network Access Service
The Local Area Network (LAN) Access permits a Bluetooth-enabled
personal computer to use an Ethernet connection that is physically located
on another Bluetooth-enabled computer or Network Access Point (the
“gateway”). Only Point-to-Point Protocol (PPP) is supported.
LAP Server Setup (Windows 2000)
1) Click the Start button and then select “Settings”, and “Network and
Dial-up Connections”.
2) Double-Click the “Local Area Connection” icon.
3) Click the “Sharing” tab.
4) Click the “Enable Internet Connection Sharing for this connection”
box to check it.
5) Click OK to close the window.(Message: “When Internet Connection
Sharing is enabled, your LAN adapter will be set to use IP address
NNN.NNN.N.N. Your computer may lose connectivity with other
computers on your network. If these other computers have static IP
address, you should set them to obtain their IP address automatically. Are
you sure you want to enable the Internet Connection Sharing? ”)
6) Click Yes to confirm that Internet Connection Sharing should be enabled.
The server configuration is now complete.
15