Grizzly G0453 - Manual (Page 32)

-30- G0453/G0454 (Mfg. Since 3/08)
SEctION 6: MAINtENANcE
Always disconnect power
to the machine before
performing maintenance.
failure to do this may
result in serious person-
al injury.
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Note: This maintenance schedule is based on
average daily usage. Adjust the maintenance
schedule to match your usage to keep your planer
running smoothly and to protect your investment.
Every 8 hours of Operation:
•
Clean machine and protect unpainted cast
iron.
• lubricate feed rollers bushings ( Page 31).
• tighten loose mounting bolts.
• Check/sharpen/replace damaged or worn
knives (
Page 36).
• Check/repair/replace worn or damaged
wires.
• resolve any other unsafe condition.
Every 40 hours of Operation:
• Clean cutterhead and check knife height
(
Page 36).
• lubricate table columns and leadscrews
(
Page 31).
Schedule
Vacuum excess wood chips and sawdust from the
outside of the machine, inside the cabinet, and
off the motor. protect the unpainted cast iron sur-
faces on the table by wiping the table clean after
every use—this ensures moisture from wood dust
does not remain on bare metal surfaces.
Keep tables rust-free with regular applications of
products like g96
® gun treatment, slipit ® , or
Boeshield ® t-9 (see Section 5: Accessories on
Page 29 for more details).
cleaning &
Protecting
Every 160 hours of Operation:
•
Check/tension/replace V-belts ( Page 37).
• Clean/vacuum dust buildup from inside cabi-
net and off motor.
• lubricate table height worm gear ( Page 31).
• lubricate table height chain and sprockets
(
Page 32).
• lubricate drive chain and sprockets ( Page
32).
yearly:
•
Change gearbox oil ( Page 32).