Frymaster 8196606 - Manual (Page 16)

Cabinet Service Procedures
2-11
9. Slide the row assembly completely into the
cabinet and return the spacers between the heater
plates. Ensure the row is evenly positioned in the
cabinet. There must be sufficient space to allow
the bezel tabs to fit between the outside row plate
and the cabinet interior wall.
10. Replace the bezels.
CAUTION
Ensure the heater plate setscrews are tightened securely to the spacer.
Tightening the setscrews will ensure the plate is properly grounded.
Fig. 12: The heater plate slides from the insulation.