Flymo SCIROCCO 2500 - Manual (Page 5)

Attaching Debris Bag to product
1.
Locate bag frame into clip on the
underside of product. (F1).
2. Lift handle towards product until bag
latch locates and click into place. (F2)
Removing Debris Bag from Product
1.
Gently press bag latch (G1) down.
2. Lower handle of bag frame away from
product.
3. Move bag frame forward.
Assembly Instructions
K L
x 2-4
M1 M2
Attaching the Shoulder Harness
1. Attach the Shoulder Harness to the prod-
uct as illustrated in Fig H1 or H2.
2. Adjust the Shoulder Harness as required to
ensure it is in the most comfortable position
and the collection tube is positioned slightly
above the debris. (J).
Securing the Access Screw
1, Remove the label from over the Access
Screw (K).
2. Turn the Access Screw 2-4 times clock-
wise (L) until tight (do not overtighten)
• Important:- Your product will not
operate if the Access Screw is not
tightened.
Cable Restraint
1. Form loop in mains cable and push the
loop through the slot (M1).
2. To secure, position loop over the hook
and pull the cable back through the slot
(M2).
2
1
F G
1
H1
J
H2