FujiFilm A203 - Manual (Page 6)

10 11
1
Nomenclature (Sample display)
Playback frame number
Photography mode
Flash
Date
Date
Zoom bar
Battery low warning
Playback mode
Protection
DPOF
EV White balance
AF warning
AF frame
Macro
Battery low warning
Number of remaining shots
Quality mode
Camera shake warning
Example of LCD Monitor Text Display: Still image
Example of LCD Monitor Text Display: Playback
1
Getting Ready
LOADING THE BATTERIES AND xD-Picture Card
xD-Picture Card (sold separately)
DPC-16 (16MB)
DPC-32 (32MB) DPC-64 (64MB)
DPC-128 (128MB)
● ! Operation of this camera is only guaranteed when it
is used with FUJIFILM xD-Picture Card.
● ! See P.112-113 for more information on xD-Picture
Card.
Compatible batteries
Use two AA-size alkaline batteries or two AA-
size nickel-metal hydride (Ni-MH) batteries.
◆
Notes on Handling Batteries
◆
h It is recommended that you
use the same brand of alka
batteries as those supplied
with the camera.
h Never use a battery when the
outer casing is split or peeling
as this could result in a short-circuit and cause major
problems due to battery fluid leakage or overheating.
h You cannot use lithium, manganese or nickel-
cadmium (Ni-Cd) batteries.
h Do not use different types of batteries or old and new
batteries together.
h The operating lives of alkaline batteries vary between
brands and the life of batteries you purchase may be
shorter than the alkaline batteries provided with the
camera. Note also that due to the nature of alkaline
batteries, the time for which they can be used is
shorter in cold locations (at temperatures of +10°C
(+50°F) or below). Consequently, Ni-MH batteries are
recommended.
h Soil (fingerprints, etc) on the terminals of batteries can
greatly reduce the time for which the batteries provide
power.
h You will need the optional charger ( ➡P.106) to
recharge Ni-MH batteries.
h See P.109 for notes on using batteries.
Outer casing
Front Back