Frymaster 14 Series - Manual (Page 55)

4-37
4.13.6 FILTER TIME
The FLTR time option is used to set the amount of time which passes before the filtration
prompt is displayed. This option is useful in lower volume stores, where filtration is desired more
often than the amount the cook cycles would generate.
1. Perform steps 1-3 on page 4-32.
Scroll to FLTR TIME.
2. With FLTR TIME displayed, press the (1 yes) button (see Figure
179).
Figure 179
The computer displays fltr time on the left and :00 on the right.
3. Use the number keys from 0 to 9 to enter the amount of
time between filter prompts (ex. after every 2:00 hours
enter as 200) (see Figure 180).
Figure 180
The computer displays fltr time on the left and 2:00 on the right.
4. With the desired selection displayed, press the
u (INFO) button (see Figure
181).
Figure 181
5. Press the (2) button (see Figure 182) to exit.
The computer displays OFF.
Figure 182