Frymaster H52 Series User Manual

Page 47

6-8

PUMP DOES

NOT RUN.

Had the

pump been running

for a while and then

stopped?

Yes

Pull filter assembly from

cabinet and allow motor to
cool for 30 minutes. Press

thermal overload reset

button, then resume filtering.

Is pump

running OK?

Problem resolved.

Yes

If pump did not start at all, probable

causes are a failed or misaligned

pump microswitch, a failed pump relay,

or a failed pump motor. Call FASC.

If motor started, then almost immediately

stopped, probable cause is pump clogged/

jammed with debris. Call FASC.