Frymaster H52 Series - Manual (Page 35)

5-3
4. Verify that the filter screen is flat in the bottom of the pan. Lay a sheet of filter paper over the
top of the pan, overlapping on all sides (or place an optional filter pad in the bottom of the pan.)
NOTE: If using the optional filter pad, ensure that the rough-textured side of the pad is up.
5. Position the hold-down ring over the filter paper
and lower the ring into the pan, allowing the paper
to fold up around the ring as it is pushed to the bot-
tom of the pan.
If using the optional filter pad, place the ring over
the pad.
6. If using filter paper, sprinkle 8-ounces of filter powder over the paper. Replace the crumb tray
in the filter pan and close the cover.
NOTE! DO NOT use filter powder if using the optional filter pad!