FieldServer FS-8700-114 X30 - Manual (Page 6)

FS-8700-114 DeviceNet Master Manual Page 6 of 13
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: [email protected]
5.1 DeviceNet Settings
Section Title
Bridge
Column Title
Function Legal Values
System_Station_Address* DeviceNet MAC ID of the FieldServer 0-63
Note:
The DeviceNet MAC ID can also be set via the DIP switches on the side of the FieldServer but then the system
station address parameter must be removed from the configuration file.
Refer to Appendix C.1 for more information.
Example
// FieldServer
Bridge
Title , System_Station_Address
DeviceNet_Test, , 5
5.2 Server Side Connection Parameters
Section Title
Connections
Column Title
Function Legal Values
Adapter Adapter Name DNet
Protocol Protocol name X30_DNet_Master
DNet_Master_Baudrate1 Baudrate 125K , 250K , 500K
Command_DA_Name
Commanding
Scanner
Name of a data array declared under Section 4, length of 8 - Bit
data array type recommended
Status_DA_Name
Provide Scanner
status
Example
// Server Side Connections
Connections
Adapter ,Protocol
, DNet_Master_Baudrate , Command_DA_Name , Status_DA_Name
DNet , X30_DNet_Master , 500K , Command_Reg , Status_Reg
1
If System_Station_Address has not been defined in the CSV file, the DIP switch value for both MacID and Baudrate will be used and the baud
parameter in the CSV file will be ignored.