Fisher-Price BARBIE H4433 - Manual (Page 8)

8
Charger
Connector
Children can be harmed by small parts,
sharp edges and sharp points in the
vehicle's unassembled state, or by electrical
items. Care should be taken in unpacking
and assembly of the vehicle. Children should
not handle parts, including the battery, or
help in assembly of the vehicle.
WARNING
ASSEMBLY BATTERY CHARGING E
A
B
1
Dash
Sound Box
• Loosen and remove the three screws in the top of the sound box.
Remove the sound box from the dash.
H4433pr-0921
2
• Locate the battery compartment door on the back of the sound box.
• Loosen the screw in the battery compartment door.
• Remove the battery compartment door and lift to open.
• Insert three, new "AA" (LR6) alkaline batteries, as indicated inside
the battery compartment.
Hint: Use only alkaline batteries for longer battery life.
• To replace the battery compartment door, fit the tab on the door into
the slot in the back of the sound box. Tighten the screw.
Battery
Compartment
Door
F
12V Battery
• Plug the charger connector into the battery A
.
• Plug the charger into a standard wall outlet B .
Notes:
- If power flow to the wall outlet is controlled by a switch, make sure
the switch is “ON”.
- Use the charger only in a wall outlet. Do not plug the charger into a
ceiling outlet.
• The power indicator on the charger does not indicate the charge
status of your battery. The power indicator allows you to see that
there is power from the wall outlet to the charger.
• Before first-time use, charge the battery for at least 18 hours.
Never charge the battery longer than 30 hours.
• Recharge the battery for at least 14 hours after each use of your
vehicle. Do not charge the battery longer than 30 hours.
• Once the battery is charged, disconnect the battery connector from
the charger connector. Unplug the charger from the wall outlet. The
battery is now ready to be installed in your vehicle. Please see the
Battery Installation section on page 19 for detailed instructions on
installing your battery. If your battery is already installed in your
vehicle, simply re-connect the motor harness connector to the battery.
• Protect the environment by not disposing of this product
with household waste (2002/96/EC). Check your local
authority for recycling advice and facilities (Europe only).