Fisher-Price BARBIE H4433 - Manual (Page 15)

28
27
• Fit the light covers to the top of the sport bar, as shown.
• Insert a #10 x
3 /
4
" screw into each light cover. Tighten the screws.
Light
Covers
• Fit a support to one side of the sport bar.
• Insert a #8 - 32 x 1.625" screw through the support, the sport bar
and out through the support.
• Fit a #8 acorn lock nut to the end of the screw.
• While holding the acorn lock nut with an adjustable wrench
(or pliers), tighten the screw.
• Repeat this procedure to fasten the other support to the sport bar.
Sport Bar
Supports
• Using safety scissors, cut the plastic ties holding the water bottles to
the drink holders. Dispose of the plastic ties properly.
Note to Retailer: Do not remove the plastic ties.
26
Plastic Tie
Drink
Holder
Water
Bottle
15
H4433pr-0921
ASSEMBLY F
Sport Bar Support
Side
Fender
PULL
HERE
PUSH
HERE
29
• Fit the sport bar assembly into the holes in the top side of
the vehicle.
• Push down firmly on a sport bar support while pulling up on the side
fender to fit the sport bar into the vehicle.
• Repeat this procedure on the other side of the vehicle.