Fisher-Price BARBIE H4433 - Manual (Page 11)

H4433pr-0921
11
ASSEMBLY F
H4433pr-0921
11
• Position the steering wheel cover so the fastener tabs are towards
the bottom of the steering wheel.
• Fit the steering wheel cover over the steering wheel.
• Press the fastener tabs together, around either side of the bottom
spoke of the steering wheel.
Steering
Wheel
Cover
Steering
Wheel
Bottom
Spoke
Tab Tab
Tabs
Lens
Wide
Notch
Lens Guard Wide Tab
• Fit the wide notch in the side of a headlight lens under the wide tab
on a lens guard.
• Press firmly on the inside of the headlight lens to snap it into the
lens guard.
• Repeat this procedure to assemble the other headlight lens to the
remaining lens guard.
12
• Fit the steering wheel cap into the center of the steering wheel.
• Insert two #8 x 1" screws and tighten.
10
Steering
Wheel Cap
Grille
Tab
Tab
Slot
Slot
• Fit the lens tabs on the back of a lens assembly into the headlight
slots in the grille.
• Press firmly to "snap" the lens assembly into the grille.
• Repeat this procedure to "snap" the other lens assembly into
the grille.
13 Front View