Frymaster M2000 - Manual (Page 19)

Replace filter o-rings Quarterly FR 2 Q3
©McDonald’s Corporation · Planned Maintenance Manual · Revised June 2008
Page 1 of 1
Pi Frymaster Fryer
All models
using an M2000 Computer
Quart
erly
FR 2 Q3
Why To keep the fryer’s filter pump in working order
Time required 2 minutes to prepare 5 minutes to complete
Time of day At open; the fryer must be cool For 24-hour restaurants: During a low-volume period
when the fryer can be turned off
Hazard icons
Tools and supplies
O-rings for the filter
pump
Flat tip screwdriver
Procedure
1 Prepare fryer for procedure.
Check to make sure the fryer
is cool. This procedure should
be done only when the fryer is
cool and the filter pan is
empty.
2 Remove filter pan.
Pull the filter pan out of the
cabinet.
3 Replace O-ring.
Remove the O-ring from the
pan nozzle. Replace the O-
ring with a new O-ring. O-
rings can be purchased from
your local authorized servicer.
Use only the manufacturer’s
replacement O-ring. These
rings are manufactured spe-
cifically for use with hot
cooking oils. Generic O-rings
cannot be used for this pur-
pose.
4 Reinstall filter pan.
Reinstall the pan into the
fryer cabinet.