FUNAI DVR90VG - Manual (Page 83)

81 EN
xxxx
Others
Recording
Playing
discs
Editing
Before
you
start
Connections
Getting
started
Changing
the
Setup
menu
VCR
functions
Others
E
sp
añ
ol
Troubleshooting (cont’d)
* If you are still having trouble with this unit after checking Troubleshooting, write down the error code and the
error description, and call our helpline mentioned on the front page to locate an Authorized Service Center.
You can watch the TV programs
with the tuner of the unit. (Usually
channel 3 or 4 of the TV is
available for the RF converter
setting.) Be sure to connect the
unit to a TV using the RF cable.
Refer to page 14.
1
Select channel 3 on your TV.
2
Press [VIDEO/TV] on the remote
control.
• If noise appears, change the
RF output channel of the unit to
CH 4 by pressing
[VIDEO/TV]
for 3 seconds. The RF output
channel will alternate between
CH3 and CH4 as follows.
• Each time the RF output
channel is changed, CH3 or
CH4 will appear on the front
panel display.
RF output switch
STOP
POWER
T-SET TIMER PROG.
SKIP SKIP
OPEN/CLOSE
SPACE
1 2 3
4 5 6
7 8
0
9
CH
VIDEO/TV
SLOW
PAUSE
.@/: ABC DEF
GHI JKL MNO
PQRS
REC/OTR
DISPLAY
TUV WXYZ
DVD REC/OTR
REC SPEED
ZOOM
SEARCH
VCR
SETUP
CM SKIP
RETURN MENU/LIST TOP MENU
DUBBING
x1.3/0.8
CLEAR
ENTER
PLAY
AUDIO
for more than
3 seconds
(RF on) CH4
3 seconds
(RF on) CH3
(RF on) CH4
3 seconds
3 seconds
3 seconds
Error message Cause Solution
Recording Error
You cannot record more than 99
titles on one disc.
(The maximum is 99)
You are trying to record onto the disc
on which the number of recording
titles comes up to the maximum (99).
Delete unnecessary titles
(pages 54, 57).
Recording Error
You cannot record more than
999 chapters on one disc.
(The maximum is 999)
You are trying to record onto the VR
mode DVD-RW disc on which the
number of recording chapters comes
up to the maximum (999).
This unit cannot delete the original
chapter. Delete unnecessary chapter
marker using other DVD recorders.
Delete unnecessary chapter markers
(page 56).
Recording Error
You cannot record on this disc
as Control Information is full.
This disc has no space to write the
Control Information when recording
or deleting contents.
When editing has been repeatedly
performed, the control Information
area may come up to be full even the
recording area has enough space.
Delete unnecessary titles
(pages 54, 57).
Recording Error
You cannot record on this disc
as Power Calibration Area is
full.
When recordings are performed
repeatedly onto an unstable disc, this
area may come up to be full.
Every time you insert a disc for
recording, the disc’s working area will
be taken up. And if you repeat this
frequently, it will be used up sooner
and you may not be able to record
full 99 titles.
Insert a new disc.
Recording Error
This disc is already finalized.
You are trying to record onto
the disc already finalized.
Release the finalizing for this
disc (page 36).
E9A10UD_DVR90VG.indd 81 005/1/6 18:56:1