FUNAI DVR90VG - Manual (Page 32)

30 EN
XXXX
Recording
One-touch Timer Recording
Note
• The remaining recording
time will appear on the
display panel during an
One-touch Timer Recording.
Press [DISPLAY] to see it
on the TV screen.
• You cannot pause a One-
touch Timer Recording.
• Unlike a Timer Recording,
you can perform the following
operations during a One-
touch Timer Recording.
- Turning off the power
- Using [REC/OTR] (DVD)
and [STOP C]
• The unit will be turned off
automatically under the
following conditions.
1) No space remained on the
disc
2) When a power failure
occurs
• If OTR is finished in DVD
during playback or REC
mode in VCR, the DVD will
be in STOP mode and the
VCR keeps the current mode.
• When OTR is finished and
the power is turned off, the
unit will switch to the standby
mode automatically if a
Timer Recording has been
programmed. Press
[T-SET]
to cancel the standby mode
for using the unit continuously.
STOP
POWER
T-SET TIMER PROG.
SKIP SKIP
OPEN/CLOSE
SPACE
1 2 3
4 5 6
7 8
0
9
CH
VIDEO/TV
SLOW
PAUSE
.@/: ABC DEF
GHI JKL MNO
PQRS
REC/OTR
DISPLAY
TUV WXYZ
DVD REC/OTR
REC SPEED
ZOOM
SEARCH
VCR
SETUP
CM SKIP
RETURN MENU/LIST TOP MENU
DUBBING
x1.3/0.8
CLEAR
ENTER
PLAY
AUDIO
4
3
2
4
DVD-RW DVD-RW
Video
DVD-RW DVD-RW
VR
DVD-R DVD-R
This is a simple way to set the
recording time in blocks of 30
minutes. Check that the disc has
enough space for the time you set.
After finishing the recording, the
recorder automatically goes into
standby.
First:
1
Turn on the unit and load a
recordable disc.
Make sure that the TV input is set
on the unit.
2
Using [REC SPEED], select a
recording speed.
Refer to “Recording speed” on
page 5.
3
Using [CH K / L] or the Number
buttons, select a desired chan-
nel to record.
4
Press [REC/OTR] (DVD) repeat-
edly to select desired recording
time.
Recording times appear on the TV
screen (30 minutes to 8 hours).
Recording will start.
When the unit reaches the
specified time, it will be turned off
automatically.
To change the recording length
during the One-touch Timer
Recording, press
[REC/OTR] (DVD)
repeatedly until the desired length
appear.
To cancel the One-touch Timer
Recording within the specified
time, press
[STOP C] .
This operation may take a
while to be recognized.
I 0:30
This operation may take a
while to be completed.
0:30
(Normal Recording)
8:00 7:30
1:00
DVD
E9A10UD_DVR90VG.indd 30 005/1/6 18:55:19