Nfunction of interface board n dimensions – FUJITSU FTP-628MCL451 User Manual
Page 4

4
FTP-628MCL401/451
7.5
(54)
3.9
3.
42.2
2.8
10.7
5.4
8.2
platen center
printer position standard
platen unit
paper exhaust position
lever
platen unit
paper
printer
cutting position
n
FuNCTiON OF iNTerFaCe bOard
n
diMeNsiONs
1. Printer mechanism
Unit: mm
Note: 1. Dimensions are nominal value (tolerance ±5 unless otherwise specified).
2. Platen unit (lever, platen, etc) moves by approximately 0.7mm toward paper insertion direction when platen is
open.
FTP-628MCL40
Item
Item
. Test print function
8.
Cutter trouble detect
2. Paper out detection
9.
Motor power saving function
3. Paper near end detection
0. Mark detection function
4. Platen open detection
. MCU operation abnormality detection
5. Thermal head temperature abnormality detection
2. Power ON/OFF sequence protection
6. Blow-out fuse detection
3. Motor over-current protection
7. Head voltage abnormality detection
4. Hardware timer