Fisher & Paykel BGB48 - Manual (Page 24)

22
❏ Specified clearances main-
tained to combustibles.
❏ Verified proper enclosure
ventilation.
❏ All internal packaging and
any adhesive residue
removed. To remove stub-
born residue, use rubbing
alcohol or a commercially
available adhesive remov-
er.
❏ Removed shipping brack-
ets.
❏ Knobs turn freely, bezels
centered.
❏ Each burner lights satis-
factorily, individually or
with adjacent burner lit.
❏ Air shutters adjusted.
❏ Low flame setting satis-
factory.
❏ Drip pan in place properly
and sliding freely.
❏ Heat Shields are located
properly and in place.
❏ Pressure regulator con-
nected and set for 1 kPa
Natural, 2.75 kPa LPG gas.
❏ Manual shut-off valve
installed and accessible.
❏ Unit tested and free of
leaks.
❏ User informed of gas
supply shut-off valve
location.
❏ All radiants are assembled
and put in place.
❏ Check match lighting.
■ PLEASE LEAVE THESE
INSTRUCTIONS WITH THE
USER.
■ USER, PLEASE RETAIN
THESE INSTRUCTIONS
FOR FUTURE REFERENCE.
INSTALLATION
INSTALLER CHECKLIST