Fisher & Paykel BGB48 - Manual (Page 19)

17
STEP 1
Place the cylinder restraint in the island (Fig. 14).
STEP 2
Locate the cylinder restraint in the island within the recommended
area
(Fig. 13 and 15).
STEP 3
Once located, secure to the bottom of the island using all eight hole
locations provided on the restraint. Wood screws can be used for
wooden floors or 1/4” (6mm) diameter anchor screws or bolts may be
used if the floor is concrete or masonry (Fig. 16).
STEP 4
When secure, place the LPG cylinder into the cylinder restraint mak-
ing sure to seat the cylinder all the way down, securely affixing the
cylinder in the restraint (Fig. 17).
STEP 5
Attach the regulator hose assembly and operate the grill normally as
described in the manual (Fig. 18).
INSTALLATION
GAS HOOK-UP
FIG. 18
FIG. 14
FIG. 15
FIG. 16
FIG. 17