FUNAI ZV457MG9 A - Manual (Page 46)

44 EN 44 EN
4 Use [K / L / s / B] or [the Number
buttons] to enter the start and end
time, then press [B].
Date
JAN/02
REC To Mode
DVD SP
SP 2h00m
Start End
- - : - -
CH
DTV69. 1
12 : 00AM
• You cannot make a program which recording
time exceeds 12 hours.
5 Use [K / L / s / B] to select analog
(“- - -”) / digital (“DTV”) mode or
external input (L1 / L2), then press [B].
e.g.) external input mode
Date
JAN/02
REC To Mode
DVD SP
SP 1h00m
Start End
CH
L1
1 : 00AM 12 : 00AM
To record from external input (e.g., cable/
satellite box), select L1 or L2.
Use [K / L] or [the Number buttons] to select
the channel number to record, then press [B].
For digital mode, select both major and minor
channels. Refer to “How to select a channel
number for the timer recording” on page 45
for more details.
e.g.) analog mode
Date
JAN/02
REC To Mode
DVD SP
SP 1h00m
Start End
CH
10
1 : 00AM 12 : 00AM
e.g.) digital mode
Date
JAN/02
REC To Mode
DVD SP
SP 1h00m
Start End
CH
DTV69. 1
1 : 00AM 12 : 00AM
6 Use [K / L] to select the recording
media (“DVD” or “VCR”), then press
[B].
e.g.) recording to DVD
Date
JAN/02
REC To Mode
DVD SP
SP 1h00m
Start
12 : 00AM
End
1 : 00AM
DTV69. 1
CH
7 Use [K / L] to select a recording mode.
Date
JAN/02
REC To Mode
DVD
SP 1h00m
Start End
CH
DTV69. 1
1 : 00AM 12 : 00AM
SP
Refer to “Recording Mode” on page 39.
• When recording to DVD, you can check the
remaining recordable space of the disc when
you select the recording mode.
Date
JAN/02
REC To Mode
DVD
SP 1h00m
Start End
CH
DTV69. 1
1 : 00AM 12 : 00AM
SP
Auto recording mode select (DVD only)...
When “Auto” is selected as a recording mode, the unit
calculates how much time is available on the disc and
selects the best recording mode available
automatically to complete recording the program.
Date
JAN/02
REC To Mode
DVD
Auto 1h00m
Start End
CH
DTV69. 1
1 : 00AM 12 : 00AM
Auto
• “Auto” is only available for one program in the timer
program list.
• The recording may be cut short when the available
recording space of the disc is too limited.
8 Press [OK] when all items are entered.
After displaying an instructive message for 10
seconds, timer program list will appear.
Press TIMER SET to Timer Standby mode.
When Timer set on DVD or VCR,
it is not available in the standby mode.
Press TIMER SET to cancel the Standby mode.
Timer Programming
THU JAN/01 11:00AM SP (1:00)
JAN/ 2/09 12:00 AM 69.1 SP
Date Start End CH
JAN/02 12:00AM 1:00AM DTV69. 1
Your program setting is now stored.
• To set another program, repeat steps 2 to 8.
• To exit, press [TIMER] or [SETUP].
• When 2 or more programs are overlapped,
“Timer program overlapped” appears, and the
overlapped program will be displayed in blue.
• To correct the timer program refer to
“Checking, canceling, or correcting the timer
programming information” on page 45.
9 Press [TIMER SET] to set a timer
programming.
will appear on the front panel display, while
this unit waits to make the recording.
CS DR CD
HDD
DVD
“VCR” will appear on the front panel display if
VCR timer recording have been set.
TIMER RECORDING
E9S80UD_ZV457MG9_v1.indd 44 E9S80UD_ZV457MG9_v1.indd 44 2008/12/12 15:16:15 2008/12/12 15:16:15