Freescale Semiconductor 802.15.4 - Manual (Page 46)

6-4 Embedded Bootloader Reference Manual, Rev 0.0 Freescale Semiconductor
6.4 Source Files
This section describes the source files.
6.4.1 Target.h
The user must define the PCB target specific #defines in the
Target.h
in the
.\802.15.4_Headers\Ghdr
. file for a successful port.
NOTE
Several other #defines are made in the target description in target.h. The
#defines are used by the 802.15.4 MAC/PHY build. The listed #defines
are the ones which must (also) be defined for the Embedded Bootloader:
Example for the Freescale TARGET_DIG528_2 and TARGET_DIG536_2:
MC13192 reset pin connection:
#define HWAssertAbelReset PTCD &= ~0x10; // Reset = 0;
#define HWDeAssertAbelReset PTCD |= 0x10; // Reset = 1;
Optional for Safe Mode Boot indicator function (LED pin connections):
#define LED1ON PTDD &= 0xFE;
#define LED1OFF PTDD |= 0x01;
#define LED1TOGGLE PTDD ^= 0x01;
#define LED2ON PTDD & = 0xFD;
#define LED2OFF PTDD | = 0x02;
#define LED2TOGGLE PTDD ^ = 0x02;
#define LED3ON PTDD & = 0xF7;
#define LED3OFF PTDD | = 0x08;
#define LED3TOGGLE PTDD ^ = 0x08;
#define LED4ON PTDD & = 0xEF;
#define LED4OFF PTDD | = 0x10;
#define LED4TOGGLE PTDD ^ = 0x10;
The MC13192 attention and reset pin (bit) positions:
#define ABEL_ATT_PIN (1<<2)
#define ABEL_RESET_PIN (1<<4)
HCS08 port setup macros:
#define mSETUP_PORT_A //PTAPE = 0x3C;\