FORD 1999 Taurus - Manual (Page 116)

111
Personality Memory recall from the remote
transmitter can be disabled. This is done by sliding
the switch on the back of the transmitter to OFF.
Personality Memory can still be recalled using
keyless entry code or the Memory 1 or Memory 2
switches.
Keyless Entry
Up to three unique keyless entry codes can be
programmed by the customer. Two of the codes
can be assigned to recall Personality Memory 1 or
Memory 2. Each time the 5-digit code is entered on
the keypad, the driver’s door will unlock and
Personality Memory 1 or Memory 2 will be
recalled.
NOTE: Please note that even though the driver’s
Personality Memory may be recalled using remote
or keyless entry, the seats and mirrors will not
move to the driver’s set positions until the driver’s
door is opened. The steering column will move
when the key is inserted.
Memory Switches
Pressing either the Memory 1 or Memory 2 switch
on the driver’s door will also recall the Personality
Memory settings as selected, providing your vehicle
is in P (Park) or N (Neutral).
Auto Save
Any change made by the driver to one of the above
Personality Memory settings will be updated and
saved automatically. The display, DRIVER 1 (or 2)
SETTING SAVED, will appear on the Message
Center for five (5) seconds as a confirmation of the
update to Personality Memory.
If the driver does not use the remote entry
transmitter, or keyless entry keypad to unlock the
doors upon entering or does not press the Memory
1 or Memory 2 switch, then any change to one of
the Personality Memory settings will not be
automatically saved. Instead the driver will be
prompted by the Message Center. “IDENTIFY
DRIVER TO SAVE”. Press select button (located on
File:05fncf8.ex
Update:Thu Jun 27 10:02:20 1996