Furuno Multi Instrument FI-504 - Manual (Page 11)

1. OPERATION
3
1.4 Selecting a Display
Use the DISP key to select a display category. Select desired display
with the MODE key.
HEADING
Current heading
Average heading
Heading on next tack
Course over ground
Course made good
Distance made good
NAVIGATION
Bearing to waypoint
Distance to waypoint
Cross track error
Waypoint number/name
Latitude
Longitude
Course over ground
Speed over ground
Satellites tracked
Roll
Pitch
AUTOPILOT
Rudder angle
ENGINE
Trip fuel usage
Fuel usage rate
Engine RPM
SPEED
Boat speed
Maximum STW
Average STW
SOG
Maximum SOG
Average SOG
VMG to windward
Log
Trip
TIMER
Count-up timer
Count-down timer 1
Count-down timer 2
DEPTH
Current depth
Shallow alarm
Deep alarm
Shallow anchor alarm
Deep anchor alarm
WIND
Wind speed
Maximum true wind speed
Maximum true wind speed alarm
Low true wind speed alarm
Wind angle
High apparent wind angle alarm
Low apparent wind angle alarm
Beaufort wind speed
Ground wind direction
ENVIRONMENT
Battery voltage
Minimum battery voltage alarm
Time
Date
Water temperature
Air temperature
Air pressure
Humidity
Wind chill temperature
Dew point
DISP