FUJITSU MPC3065AH - Manual (Page 95)

C141-E056-01EN 5 - 32
Table 5.5 Information to be read by IDENTIFY DEVICE command (3 of 3)
*10 Word 64: Advance PIO transfer mode support status
Bit 15-8: Reserved
Bit 7-0: Advance PIO transfer mode
Bit 1=1 Mode 4
Bit 0=1 Mode 3
*11 Word 80: Major version number
Bit 15-4: Reserved
Bit 3: ATA-3 Supported=1
Bit 2: ATA-2 Supported=1
Bit 1: ATA-1 Supported=1
Bit 0: Undefined
*12 Word 82: Support of command sets
Bit 15: Identify Device DMA command supported = 1
Bit 14: NOP command supported = 0
Bit 13: Read Buffer command supported = 1
Bit 12: Write Buffer command supported = 1
Bit 11: Write Buffer command supported (Old Spec.) = 1
Bit 10: Host Protected Area feature command supported = 0
Bit 9: Device Reset command supported = 0
Bit 8: SERVICE Interrupt supported = 0
Bit 7: Release Interrupt supported = 0
Bit 6: Lock Ahead supported = 1
Bit 5: Write-cache supported = 1
Bit 4: Packet command feature set supported = 0
Bit 3: Power Management feature set supported=1
Bit 2: Removable feature set supported=0
Bit 1: Security feature set supported=1
Bit 0: SMART feature set supported=1
*13 Word 88: Ultra DMA modes
Bit 15-11: Reserved
Bit 10-8: Currently used Ultra DMA transfer modes
Bit 7-3: Reserved
Bit 2-0: Supportable Ultra DMA transfer mode
Bit 2=1 Mode 2
Bit 1=1 Mode 1
Bit 0=1 Mode 0