Furuno NX-700A/B - Manual (Page 27)

2. OPERATION
2-7
1. Press the MENU/ESC key to show the main menu.
2. Press ▲ or ▼ to choose NAVTEX (for Rcv Mask, INS Output Mask and
Printer mask) or Display (for User Select Station & Msg), and then press the
ENT key.
3. Press ▲ or ▼ to choose “Rcv Mask”. “INS Output Mask”, “Printer Mask” or
“User Select Station & Msg”.
4. Press the ENT key to open the appropriate editing window. (Below is the Rcv
Mask editing window.)
Rcv Mask [Auto]
[518]
Station
ABCDEFGHIJKLMNOPQRSTUVWXYZ
Message
ABCDEF - H - JKL - - - - - - - - - V - - - Z
[490]
Station
ABCDEFGHIJKLMNOPQRSTUVWXYZ
Message
ABCDEF - H - JKL - - - - - - - - - V - - - Z
[ ][ ] MOVE
[ENT] EDIT [MENU] RETURN TO MENU
Station
Message
Internaitional frequency
Receive mode
Local frequency*
*: Local channel selected at Paragraph 2.7.
Edit window (ex. Rcv Mask)
5. Press ▲ or ▼ to choose the item to edit, and then press the ENT key to
show the alphabet selection window.
ABCDEFGHIJKLMNOPQRSTUVWXYZ
Cursor
6. Press ◄ or ► to choose the alphabet desired, and then press ▲ or ▼ to
choose to receive or not.
The alphabet you have chosen not to receive is marked with “-“ (hyphen).
7. Press the ENT key.
8. Repeat steps 5 through 7 to complete.
9. Press the MENU/ESC key to close the window.