Furuno NX-700A/B - Manual (Page 26)

2. OPERATION
2-6
2.7 Choosing the Local Frequency
You can choose 490 kHz or 4209.5 kHz as the local frequency on Auto or
Manual mode.
1. Press the MENU/ESC key to show the main menu.
2. Press ▲ or ▼ to choose NAVTEX, and then press the ENT key or ►.
3. Press ▲ or ▼ to choose Local Channel, and then press the ENT key or ► to
show the local channel options.
490kHz
4209.5kHz
Local channel options
4. Press ▲ or ▼ to choose the frequency 490 kHz or 4209.5 kHz, and then
press the ENT key.
5. Press the MENU/ESC key several times to close the menu.
2.8 Editing the Settings for Station and Message
Stations and messages for receiving/displaying on each station (message) can
be edited as below.
(NAVTEX menu)
Rcv Mask
Station
You can receive messages by station in Manual mode.
Message
You can choose the messages to receive in Manual or Auto mode. Note that
A/B/D/L cannot be rejected.
INS Output Mask
You can choose the stations and messages to output to the external equipment.
Note that A/B/D/L cannot be rejected.
Printer mask
Choose the type of message to be print automatically when it is received. Note
that A/B/D/L cannot be rejected.
(Display Menu)
User Select Station & Msg
You can choose the type of stations and messages to display on SELECT
MESSAGES display (shown by choosing “User Selected Message” after
pressing LIST key.) For detail, see page 2-9.