FUJITSU PLASMAVISION P50XTA51E - Manual (Page 23)

E-23
Engli
sh
Deutsch
Esp
a
ñol
Fran
ç
ais
Italiano
Portu
gu
ê
s
日 本 語
Póññêèé
中文
ADJUSTING AUDIO
• You can make changes to all audio adjustment options in the AUDIO Menu. See Page E-19 for the basic operation procedures.
• The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any
changes.
• When the optional speaker is not installed, sound is not output.
Treble
Press EF to make adjustments.
F : Stronger treble
E : Weaker treble
Press < to store.
Bass
Press EF to make adjustments.
F : Stronger bass
E : Weaker bass
Press < to store.
Balance
Press EF to make adjustments.
F : Shifts the volume balance towards the right.
E : Shifts the volume balance towards the left.
Press < to store.
Loudness
Corrects the balance between bass and treble for easy listening even with weak volume.
Each time you press E or F , one of the available choices appears in the following sequence:
< On < Off <
Press < to store.
AUDIO Menu screen
Note
• The screen display disappears if there is no operation within approximately 60 seconds.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred picture quality within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
• AUDIO menu will not be displayed when “No Audio” is selected. (See P. E-27.)
01_E_7473.book 23 ページ ２００６年９月６日 水曜日 午後２時３６分