FUJITSU PLASMAVISION P50XTA51E - Manual (Page 20)

E-20
ADJUSTING THE PICTURE
• Picture-related items can be set and adjusted in the Picture Adjustment Screen. See BASIC PROCEDURE OF ADJUSTMENT MENU
OPERATIONS on page E-19 for the basic operation procedures.
Signal Contrast
Press F to increase the input signal contrast.
Press E to reduce the input signal contrast.
Press < to store.
Drive Contrast
Press F to raise the display’s luminance level, and increase the contrast.
Press E to lower the display’s luminance level, and reduce the contrast.
Press < to store.
*If Ambient Sensor is ON, the change made by this adjustment may be difficult to be recognized in too bright or dark a place.
Brightness
Press F to increase the brightness.
Press E to reduce the brightness.
Press < to store.
Color
Press F to darken the color.
Press E to lighten the color.
Press < to store.
Tint
Press F to change the tint to a more greenish color.
Press E to change the tint to a more purplish color.
Press < to store.
Sharpness
Press F to sharpen the Sharpness.
Press E to soften the Sharpness.
Press < to store.
Ambient Sensor
Automatically adjusts the Sharpness to an optimized level that matches the brightness of the surrounding area.
Each time E or F is pressed, the setting is switched.
< On < Off <
Press < to store.
Picture Mode
Each time you press E or F , the available choices appear in the following sequence.
< Natural < Fine < Effective < Conventional < Still <
Press < to store.
Natural Enables you to watch pictures with natural color tones and high picture clarity. This mode is suitable for watching movies or TV.
Fine Best for watching movies in darkened rooms.
Effective Best for watching TV in bright environments.
Conventional Displays a screen approximating that of a conventional TV screen.
Still Suitable for watching static images such as computer or still camera images.
01_E_7473.book 20 ページ ２００６年９月６日 水曜日 午後２時３６分