FUJITSU PLASMAVISION P50XTA51E - Manual (Page 11)

E-11
Engli
sh
Deutsch
Esp
a
ñol
Fran
ç
ais
Italiano
Portu
gu
ê
s
日 本 語
Póññêèé
中文
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT
• Connects to the antenna input terminal on the display bottom.
• Connect the video signal cable to the component video input terminal, HDMI input terminal, S-video input terminal, or the video input terminal.
• If the component to be connected is equipped with HDMI output terminal or the component video output terminal, connection to either of these
terminals is recommended. (If the HDMI output is connected, an Audio signal cable does not need to be connected.)
• Connect the video signal cable to the SCART input terminal.
• As the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase.
DVD RECORDER/PLAYER, SATELLITE TUNER
VCR/PC
To component video outputs
To audio
outputs
To audio inputs
To component
video inputs
Display bottom
To HDMI output
To HDMI input
SATELLITE TUNER
DVD RECORDER/
PLAYER
Antenna (commercially
available product)
To the antenna input
Antenna
(commercially
available product)
To audio inputs
To RGB output
(mD-sub)t
To audio output
Display bottom
To RGB input
(mD-sub)
To SCART output
To SCART
input
To the antenna input
Antenna
(commercially
available product)
Note
• Please enquire with your local teletext broadcasting company if you want to receive teletext broadcasts.
• Unplug the power cord from the AC outlet before you connect external components.
• Also refer to the instructions for the component to be connected.
• When inputting audio, connect to the terminals corresponding to the used video input or RGB input.
01_E_7473.book 11 ページ ２００６年９月６日 水曜日 午後２時３６分