Fisher-Price K4563 - Manual (Page 10)

K9758pr-0920
10
ASSEMBLY F
K9758pr-0920
8
• Turn the vehicle on its side.
• Insert the end of the steering column through the hole in the
steering rod.
• Place a 3 /
8
" washer on the end of the steering column.
End of
Steering
Column
Steering
Rod Hole
Washer
9
• Insert a #8 x 5 /
8
" screw through the hole in the end of the
steering column.
• Fit a #8 lock nut on the end of the screw and tighten.
• While holding the lock nut with an adjustable wrench (or pliers),
tighten the screw.
• Turn the vehicle upright.
End of
Steering
Column
#8 Lock Nut
#8 x 5 /
8
" Screw
• Fit the steering wheel cap into the center of the steering wheel.
• Insert two #8 x 1" screws and tighten.
• Insert the 5 /
32
" x 1 1 /
2
" pin through the hole in the end of the
steering column.
• Lower the steering column so that the pin fits inside the center of
the steering wheel.
6
End of
Steering
Column
5 /
32
" x 1 1 /
2
" Pin
7
Steering
Wheel
Cap
Lens
Wide
Notch
Lens Guard Wide Tab
• Fit the wide notch in the side of a headlight lens under the wide tab
on a lens guard.
• Press firmly on the inside of the headlight lens to snap it into the
lens guard.
• Repeat this procedure to assemble the other headlight lens to the
remaining lens guard.
10
BOTTOM VIEW