FUJITSU MAF3364FC - Manual (Page 18)

C141-F037-02EN 1 - 1
CHAPTER 1 SPECIFICATIONS AND EQUIPMENT
CONFIGURATION
1.1 Product Specifications
1.2 Installation Conditions
1.3 Power Supply Conditions
1.4 Connection Conditions
1.5 Settings
This chapter describes concerning the specifications and configuration of the intelligent disk drive. The
MAF3364FC and MAG series intelligent disk drives (IDD) are high performance, large capacity 3.5 inch
fixed magnetic disk drives with a built-in fibre channel controller. The interface used to connect the
MAF3364FC and MAG series intelligent disk drives with the host system is compatible with the SCSI
standard. It complies with the fibre channel PLDA standard “NCITS TR-19 FIBRE CHANNEL
PRIVATE LOOP SCSI DIRECT ATTACH (FC-PLDA)” which includes all from the fibre channel
physical hierarchy to the SCSI command protocol.
Details of the contents included in this chapter are included in the Product Manual, so please refer to these
items in the Product Manual corresponding to each item.
1.1 Product Specifications
Concerning the “Model and Product Number”, “Basic Specifications”, “Environmental
Specifications,” “Error Rate,” and “Reliability,” please refer to 2.1, “Hardware Specifications” in
the Product Manual (C141-E078EN).
1.2 Installation Conditions
Concerning the “External Dimensions,” “Installation Direction,” and “Cautions during
Installation,” please refer to 4.1, “Mounting Requirements” in the Product Manual (C141-
E078EN).
1.3 Power Supply Conditions
Concerning this item, please refer to 4.2, “Power Supply Requirements” in the Product Manual
(C141-E078EN).