Foundry Networks 2402CF - Manual (Page 32)

I
NSTALLING THE
S
WITCH
4-4 © 2003 Foundry Networks, Inc. February 2003
Figure 4-1. Attaching the Brackets
2. Mount the device in the rack, using four rack-mounting
screws (not provided).
Figure 4-2. Installing the Switch in a Rack
3. If installing a single switch only, turn to “Connecting to a
Power Source” at the end of this chapter.
4. If installing multiple switches, mount them in the rack, one
below the other, in any order.
Desktop or Shelf Mounting
1. Attach the four adhesive feet to the bottom of the first switch.
100BA SE-FX Single mode Modu le
MS-3726 -SFC
TX
RX
100BA SE-FX Singlem ode M odule
MS-372 6-SFC
TX
RX