FUJITSU SCANPARTNER 620C - Manual (Page 10)

2-6
2.4 ADF OUTPUT TRAY
i). Hold the output paper tray some 30 degrees aslant as shown in Figure 2-5.
ii). Insert the three protrusions on the output paper tray to the three slots on the ADF.
iii). Release the paper tray gently. Make sure the tray is firmly attached to the ADF.
iv). Pull out the output paper tray extension wire to the desired length.
Figure 2-5 Install the ADF Output Paper Tray
Extension
ADF Output Tray
Protrusions