Furuno CSH-5 MARK-2 User Manual
Page 51
45
E/S Menu
Item
E/S SHIFT
E/S IR
E/S GAIN
E/S CLUTTER
E/S ADVANCE
E/S COL CURVE
(Response Color
Curve)
E/S DRAFT
Contents
Shifts the start depth of the display range and the maximum value is about
1000 m irrespective of the depth unit. The unit shift value is determined by
the range in use. See table below.
Turns the Interference Rejector on and off.
Controls the gain of the Echo Sounder picture.
Eliminates the noise appearing on the screen.
Adjusts the picture advancement speed. 1/1 is fastest, 1/8 is slowest.
This menu sets the balance between weak and strong echoes. In the LINEAR
position, output (echo strength displayed) varies proportionally with input
(actual echo strength). Select a higher setting to emphasize weak echoes.
Weak echoes are displayed in stronger echo colors as the number goes higher.
The standard setting is the LINEAR position.
Adjusts the draft of the own ship according to loading conditions.
Irrespective of the depth unit selection, the draft adjustment is available from
0 to 10 m in 0.5 m steps.
M
FT
FA
P/B
2
20
50
10
10
3
40
100
20
20
4
50
100
25
25
5
50
200
40
40
6
100
200
50
50
7
100
300
50
50
1 10
25
5
5
20
60
10
40
120
20
80
240
40
120
360
60
160
480
80
240
720
120
320
960
160
M
FT
FA
P/B
2
3
4
5
6
7
20
40
60
80
120
160
1
10
Depth unit may be selected on the SYSTEM Menu.
Selects the display range of the Echo Sounder from the table below.
E/S RANGE