FUJITSU FTP-632MCL004 - Manual (Page 2)

2
FTP-632MCL001/002/303/304
■ DESIGNATION
Part number
Standard FTP-632MCL001/002 *1
FTP-632MCL303/304 *1
FTP-622DCL001/011 *2
FTP-622DSL001/011/012 *3
FTP-622CU101 *4
FTP-622Y001
FTP-622Y201
FTP-622Y301
FTP-622Y401
Item
Printer mechanism
Interface board
(Continued)
Parallel (Centronics Standard)
Serial (RS232C)
Thermal head cable
Parallel interface cable
Serial interface cable
Power cable
*1: 001/303 is for front paper insertion (curl path) and 002/304 is for rear paper insertion (straight path).
*2: 001/011 supports ANK and 101 supports ANK + Kanji.
*3: 001/011/012 supports ANK and 111 supports ANK + Kanji.
*4: CU101 supports Kanji and cutter control.
■ GENERAL SPECIFICATIONS
Cables
LSI(MCU)
Printer mechanism with cutter
Part number FTP-632MCL001/002 FTP-632MCL303/304
Printing method Thermal-sensitive line dot method
Dot structure 576 dots/line
Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area 72 mm
MCL001/303 80 mm
Paper width
MCL002/304 85 mm
Paper thickness 60~100
µ
m* 1 60~100
µ
m* 1
Cutter type --- full or partial
Number of columns 48 columns/line (24
×
12 dot font)
Maximum printing speed 640 dotlines/s (80 mm/s)
Alphanumeric KANA: 159 International characters: 195
Character types
JIS KANJI (FTP-622DCL101/111): approximately 6800
24
×
12 dots, (3.0
×
1.5 mm), 48 columns
24
×
24 dots, (3.0
×
3.0 mm), 24 columns
16
×
8 dots, (2.0
×
1.0 mm), 72 columns
16
×
16 dots, (2.0
×
2.0 mm), 36 columns
Specifications Item
Character composition, dimensions (H
×
W),
Number of characters