Frymaster LOV BIGLA30 - Manual (Page 71)

5-9
Computer displays fIltEr menu for three seconds changing to Auto Filter.
2. Press the
u(INFO) button to scroll to maInT fIltEr.
3. When the desired selection is displayed press the 9 (1) button to
continue.
The computer displays maInT fIltEr? alternating with Yes NO.
4. Press the 9 (1 yes) button to start the manual filtration process. If
CLOSE DISPOSE VALVE is displayed, close the RTI dispose
valve. Press the 8 (2
NO) button to exit.
If no pan is in place the computer displays INSERT PAN until a pan is detected. The computer
displays filtering and oil drains from the frypot.
DANGER
Keep all items out of drains. Closing actuators may cause damage or injury.
The computer display changes to scrub vat complete? alternating with Yes.
5. Clean the vat with a scrub brush and press the 9 (1
yes) button to
continue when complete.
The computer displays IS OIL SENSOR CLEAN? alternating
with Yes.
6. Clean the oil level sensor with a no scratch pad and press the 9 (1
yes) button to continue (see section 6.6.2 on page 6-5).
The computer displays wash vat? alternating with Yes.
7. Press the 9 (1 yes) button to continue.
The computer displays washing.
The return valve opens and the pot is flushed with oil from the pan.
The filter pump shuts off and the computer displays wash
again? alternating with yes no.
8. If the pot is clean of debris, press the 8 (2 NO) button to continue
and skip the wash again cycle. If crumbs are still present, press the
9 (1 yes) button and the filter pump runs for another 30 seconds.
This cycle repeats until the 8 (2
NO) button is pressed.