FUJITSU PCI Gigabit Ethernet 4.1 Update 2/ 5.0 for Oracle Solaris C120-E276-11ENZ0(A) User Manual
User's guide
Table of contents
Document Outline
- Title Page
- Preface
- Revision History
- Contents
- Chapter 1 Product Outline
- Chapter 2 Gigabit Ethernet Card Installation
- Chapter 3 Setting Instructions
- Chapter 4 LinkAggregation Feature
- 4.1 About LinkAggregation Feature
- 4.2 Configuration of the LinkAggregation Feature
- 4.2.1 Setting and Displaying the Configuration with the dladm(1M) Command
- 4.2.1.1 Create a LinkAggregation (dladm create-aggr)
- 4.2.1.2 Delete a LinkAggregation (dladm delete-aggr)
- 4.2.1.3 Modify a LinkAggregation (dladm modify-aggr)
- 4.2.1.4 Add Interfaces to a LinkAggregation (dladm add-aggr)
- 4.2.1.5 Remove Interfaces from a LinkAggregation (dladm remove-aggr)
- 4.2.1.6 Display LinkAggregation Statistics and Information (dladm show-aggr)
- 4.2.1 Setting and Displaying the Configuration with the dladm(1M) Command
- 4.3 Notes
- Chapter 5 Troubleshooting
- Appendix A Messages
- Appendix B Gigabit Ethernet Card LED Diagnosis
- Appendix C Using FUJITSU PCI GigabitEthernet in a Cluster Environment
- Appendix D Using FUJITSU PCI GigabitEthernet in Solaris Containers
- Appendix E Using FUJITSU PCI GigabitEthernet in Oracle VM Server for SPARC
- Appendix F Using FUJITSU PCI GigabitEthernet in Solaris 11 Network Virtualization
- Appendix G PCI Slot Number and Device Name