Frymaster FR2 - Manual (Page 10)

Calibrate fryer recovery time
(continued)
©McDonald’s Corporation · Planned Maintenance Manual · Revised June 2008
Page 2 of 2
Frymaster Fryer
All models usi
ng an M2000 Computer
Monthly
FR 2 M1
4 Adjust fryer, if necessary.
If the fryer’s recovery time is
not acceptable, check the fol-
lowing items on the fryer. If
you find any problems, cor-
rect them as described.
If the fryer filters are dirty,
replace them.
If the oil is below the “Oil
Level” line when the fryer is
at cooking temperature, add
oil until it reaches the “Oil
Level” line.
If the oil is above the “Oil
Level” line, remove oil until it
reaches the “Oil Level” line.
For electric fryers only, con-
firm that the large power plug
is properly plugged in. Adjust
as necessary.
For gas fryers only, check the
seal angle, gravity blade, and
standoff. Adjust their place-
ment if necessary.
For gas fryers only, check the
air flow and combustion air
blower. Adjust as necessary.
For gas fryers only, check the
condition of the radiant burn-
ers.
Refer to trouble shooting
guide in Operators manual.
5 Check recovery time again.
If Recovery Time is not
achieved in the proper time,
call the Frymaster Service
Hotline for assistance
at 1-
800-551-8633.
6 Recalibrate all remaining
fryers.
Repeat steps 1 through 5 for
all remaining fryers.