FUJITSU FTP-629MCL054 - Manual (Page 3)

3
FTP-629MCL054/353/354-R
For head
24 VDC ±5% .4A (3A) (24V , 25% printing ratio)
For printer motor 24VDC ±5% A maximum
For cutter motor --- 24VDC±5% .2 A maximum
For logic 5VDC± 5% 0.2 A maximum
Printer Mechanism 82.3 Ч 40.5 Ч 20.5 mm ---
Dimensions
Wx D x H Printer Mechanism
w/cutter
--- 90.6 Ч 62.5 Ч 37.2mm
Interface board (DCL/DSL) 70 Ч 60 Ч 2.6mm
Interface board (DSL00) 95 x 73.5 x .6mm
Interface board (DSL300) 77 x 50x 25mm
Weight Printer mechanism Approximately 00/0g ---
Printer mechanism
w/cutter
--- Approximately 270g
Interface board (standard) Approximately 25g
Interface board (med speed) Approximately 45g
Interface board (hi speed) Approximately 20g
Life Head Pulse durability: 00 milion pulse/dot
(using Fujitsu Components' standard driving method)
Wear resistance: 00 km (at 2.5% print ratio)
Cutter --- 500,000 cuts min.
Operating temperature -10˚C to +60°C (Guarantee) 0˚C to +50°C (Guarantee)
Environmental
conditions Operating humidity 20 to 85% RH (no condensation)
Storage temperature –40°C to +75°C (excluding paper) –20°C to +60°C
Storage humidity 5 to 95% RH (no condensation)
Head temperature By thermistor
Detection Paper out/Mark detect By photointerrupter
Head release By slide switch
High sensitivity paper TF50KS-E4 (Nippon paper)
Standard paper TF60KS-E (Nippon paper), FTP-020P004 (58mm),
PD50R (Oji paper), FTP-020P020P070 (58mm)
Medium term paper TP60KS-F (Nippon paper),FTP-020P002(58mm),
PD70R (Oji paper)
P220VBB- (Mitsubishi paper)
PD60R-N (Oji paper)
Long term paper AFP-235 (Mitsubishi paper)
TP50KJ-R (Nippon paper)
HA220AA (Nippon paper)
Specifications Item
Part number FTP-629MCL054/074-R FTP-629MCL354/374-R
Interfaces Centronics / RS-232C standard / USB
Power
supply
Recommended
thermal sensitive
paper