Freedom9 IP 100 - Manual (Page 15)

freeView IP 100 User’s Manual
3 Hardware Installation
3.1 Operation Overview
Figure 3-1 shows some examples of how to connect the freeView IP 100 to the local area
network.
freeView IP
PC
IP Network
Administrator
Figure 3-1a: Single Server Usage Scenario
IP Network
freeView IP
8/16 PS/2
KVM Switch Multiple
Servers
Administrator
Figure 3-1b: Multiple Server Usage Scenario
The freeView IP 100 can be used in a multi-administrator, multi-server environment. Attaching
one or several units to a matrix KVM switch allows multiple users to access multiple servers
using the remote console.
3.2 Connecting The freeView IP 100 To The Host System
In order to connect the device to the host system, perform the following steps:
Step 1
Connect the VGA cable on one end a KVM cable to the monitor port on the host system and the
VGA cable on the other end of the cable to the monitor port on the host side of the unit.
13