Furuno FAX-30 - Manual (Page 80)

6. MAINTENANCE, TROUBLESHOOTING
6-8
6.9 Simulation Mode
The simulation mode provides simulated operation of the equipment, using an
internally generated fax image and navtex message. The fax image may be
processed as desired. This mode is mainly used for exhibition purposes.
Note:
All current fax images and navtex messages will be erased when
activating the simulation mode.
6.9.1 Accessing the simulation mode through NavNet
1. At the facsimile standby display, press the [MENU] key.
2. Press the FAX-30 SYSTEM SETUP soft key.
3. Press the SIMULATION SETUP soft key.
SIM
SETUP
EDIT
RETURN
▲
WX FAX LIVE
NAVTEX LIVE
Simulation setup menu
4. Choose WX FAX or NAVTEX as appropriate and press the EDIT soft key.
The illustration below shows the dialog box for WX FAX; the dialog box for
NAVTEX is similar.
WX FAX
▲
▼
¡
¤
SIMULATION
LIVE
5. Rotate the [ENTER] knob to choose SIMULATION and press the ENTER soft
key.
The fax image and navtex message will then be posted to the respective
standby display.