FOCUS Enhancements MANL102306 - Manual (Page 48)

Quickstart
30 FS­100 Portable DTE Recorder
Syncro Slave
This mode is for camcorders that do not have external control or
the tapeless control functionality compatible with the FS­100.
• Syncro Slave mode requires that a tape be in the camcorder
for operation.
• The FS­100 must be set to Syncro Slave control mode.
• In this mode, the FS­100 watches the record state of the
camcorder and follows its actions.
When Synchro Slave mode is entered from the menu, the Home
screen appears with the Pause indicator displayed in the upper
left­hand corner along with a
Y that indicates that the FS­100 is
following the camcorder’s record state.
Step 1: Verify that the FS­100 is in STOP mode.
Step 2: From the FS­100 Home screen, press the Right navigation
button several times until the Control screen appears:
Step 3: Use the Down navigation button to select Syncro Slave .
The dash on the left side of an item indicates it is the current
selection. The default value is
Local .
Step 4: Press the Select navigation button.
Step 5: The beginning screen returns and a Pause indicator
appears in the upper left­hand corner. Next to this symbol,
is a
Y indicating that FS­100 is now following the record
state of the connected camcorder.
Step 6: Now the FS­100 will record at the same time the camcorder
records to tape.
CONTROL
LOCAL
­SYNCRO SLAVE
AV / C
TAPELESS