FOCUS Enhancements MANL102306 - Manual (Page 110)

FS­100: Using with a Computer
92 FS­100 Portable DTE Recorder
Mounting the FS­100 (Macintosh)
Step 1: Start the Mac computer and connect the FS­100’s COMPUTER
I/O port to the computer using a standard 6­pin to 6­pin FireWire
cable.
When mounted, the FS­100 should appear on the computer's
desktop as shown below:
The FS­100 appears as a FAT32 volume with a PC label.
Step 2: Locate the FS­100 on the desktop and open it up.
Step 3: Open the folder with the most recent date code (for example,
“20050127­110345­01”). It should look similar to the
following:
Before Connecting FS­100 to a Computer
If clips have been assigned to a Reel folder: perform an Organize
Reels before connecting the unit to a computer.